Blog(102)

Look behind the scenes of nixie tube making

Cutting Pins for F Nixie tube | EP#3

Another version of a mold for manufacturing stems is in development. Meanwhile, I am trying the process of cutting wires to pins – this will be needed once the mold is ready..

We now ship also from the USA

Since I started manufacturing and selling nixie tubes and clocks, our customers from the USA formed the single biggest market for us. I remember years where we shipped 50% of our clocks to the USA. Today, I am excited to announce an improvement for our US customers – cooperation with Nicholas Stock from California. Nick […]

First sub-assembly – support of the stem – Project H #10

It’s time to finish the development of the first parts of the H tube – sub-assembly of the stem and ceramic rods. I designed this connection to be done using ceramics adhesive and it seems it will work. It is vacuum safe and it will provide enough support for the rest of the internal system […]

Project update – Project H #9

A bit longer video – I wanted to give you an update on progress in: 1:18 – upgrade of the glassworking equipment 5:28 – residual stress in the glass after sealing 7:25 – solder glass testing 11:20 – nitrogen purging setup 15:29 – connecting wires insulation 20:17 – anode cup manufacture 24:52 – ceramic parts.

Borax is not a suitable coating under high vacuum | Project H #8

Another test made – it turns out that dumet wire with its borated protective layer is not suitable for use in a high vacuum. Maybe at room temperature.. The borax layer (or the borated compounds) evaporates under high vacuum at 500C. I will need to find another solution.

Is Borax Suitable Coating for High Vacuum? | Project H #7

A borated dumet wire would be a perfect solution for the insulated electrical connection between stem and digits inside the tube H. Borax would work as the insulating layer while copper-clad NiFe core would do the electrical connection which is easy to spot-weld to both stem and digit. Moreover, we have plenty of dumet already, […]

Thinking How to Drive a Panel of 121 Nixie Tubes | Project H #6

While working on the tube H itself, we have to keep in mind also the design of the electronics – without an absolutely reliable driver, the panel will simply not deliver the desired experience. Our first idea was to use a master module with just a string of shift registers – we do this normally […]

Successful Window-Envelope Seal | Project H #5

Finally some progress – I succeeded in sealing of the front window. I still need to do thorough testing, evacuating it etc.. but it seems the design I chose might work. The tooling setup is temporary – I will make it safer and more productive later.

First Window-Envelope seal | Project H #3

First Window-Envelope seal | Project H #3

I made another step in the development of the “H tube”.. In this video, I am trying to seal the front window into the tube envelope for the first time. This experiment is mainly about exploring weaknesses in our equipment with the intention to adapt it to this size of the glass.

Vacuum Holder for Glass Window | Project H #2

Vacuum Holder for Glass Window | Project H #2

To successfully seal the glass window to the main envelope body, I need to develop a holder for the glass windows which is able to withstand high temperature and hold the glass by vacuum. I think I can mark this “done”.

Starting New 150mm Nixie Tube | Project H #1

Starting New 150mm Nixie Tube | Project H #1

I am starting a project of a new nixie tube – a large 150mm front-view nixie tube. This particular tube is designed for an artwork that will be installed in October 2020. I want to keep you regularly updated on how is this project coming along. Wish me luck 🙂

Updating firmware remotely

Updating Firmware in Our Clocks Remotely

The development of firmware for a product is a neverending story. I always wanted to keep also the clocks of our first customers up-to-date and with all the latest features, so we had to come up with a way how to update their firmware remotely. Thanks for help to: Lukáš Jezný – participating on the […]

Can nixie tube operate at 100 000 Hz?

Can Nixie Tube Operate At 100 000 Hz?

I am going to switch to making videos instead of writing the blog articles. Each new video will be added as a blog entry. I hope you will like it 🙂 Yes! With Sebastian, we are trying to understand (and explain) the physics behind the fast switching of digits in a nixie tube. Link to […]

Puri Nixie Clock in Grandhotel Pupp

June|2019 – Nixie Machine III, Grandhotel Pupp, new projects

Puri and OOO clock in Grandhotel Pupp We finally delievered the Puri and OOO clock to Grandhotel Pupp in Karlovy Vary (Czech Republic). The OOO clock turned out to be extremely difficult to finish – the ceramics shrinks and deforms and matching it to exact layout of mounting holes or tubes on board with electronics […]

Space Odyssey lab :-)

May|2019 – visiting Paul Parry, new lab, TV spot

Meeting Paul Parry Finally, after years of email communication, I had a chance to personally meet Paul Parry with his wife and see his workshop. As you probably know, Paul Parry creates nixie clocks and other devices under brand “Bad dog designs“. Among others, Paul is creator of the wonderful Bombe clock. We spent many […]